LANDMARK: Opposite MRS Filling Station by Gaduwa Bus Stop
Closed
• Mon - Sat, 08:00-18:00
Rivers State • Port-Harcourt
No. 28 Okporo Road, By Artillery Junction, Rumuogba, Port Harcourt, Rivers State
Artillery Junction
Closed
• Mon - Sat, 08:00-18:00
1.sealing and ejecting tips
before fitting a tip, make sure that the pipette tip cone is clean.
2.removing the tip ejector
please removing the tip ejector collar by following instructionpush the tip ejector down.push the opening tool pin
between the ejector bar and ejector collar to release the locking mechanism.pull the ejector collar off.
3.recommendations
1?after entering the tip at the lowermost end of the pipette handle, if operating inside the tip box, shake the
pipette left or right while gently pressing down or slightly rotate the pipette (only the single pipette can be
rotated) ) 1-2 seconds; if using a bulk tip, gently press the tip for 1-2 seconds while gently pressing the tip in
the direction of the pipette. if this operation does not achieve the desired seal, it is necessary to check the
tip and pipette.