No155 Agege motto Rd Mushin olosha bustop Lagos State
Closed
• Mon - Sat, 08:00-19:00
+48V phantom power light. When the phantom power switch is turned on, the +48V light will be on.
5.LOW CUT high pass filter
Turning this switch on will apply a high-pass filter that attenuates frequencies up to 100Hz with a slope of 12 dB/ octave.
6. MIX the knob
Adjust the level balance between the input signal to the [MIC/LINE 1/2] jack and the application signal. This controller knob does not affect the signal sent to the computer.
7. MONO switch
When the switch is turned on, the signal input to the [MIC/LINE 1/2] jack will be output to both the [MAON OUT L/R] jack and the L/R channel of the [PHONES] jack.
When the switch is turned off,