Ubiquiti Ethernet Surge Protector

+1

Surge Proctor

Nau'i

Ubiquiti Networks

Kaya

ETH-SP-G2

Samfuri

1000 Mbps

Iyakar Saurin LAN

Sabo Fil

Yanayi

Adireshin dakin ajiya

Jiha Lagos • Ikeja

21/23, OBAFEMI AWOLOWO WAY, IKEJA CLUB PLAZA, LAGOS.

Bude yanzu

• Lit - Lah, 01:00-23:00

ETH-SP-G2 Here’s the full breakdown: **Ports** 2 x RJ45 Female, 10/100/1000 Mbps **PoE Support** Yes, 802.3af/at up to 24V/48V PoE **ESD Protection** Up to 10kA discharge current **Spark-over Voltage** 90V DC, 700V max impulse **Grounding** Requires ground wire to proper earth ground **Enclosure** Weather-resistant polycarbonate **Mounting** Pole/wall mount with included screw + ground lug *3. How to install* 1. *Cable from outdoor device* → ETH-SP "POE" port 2. *Cable from ETH-SP "LAN" port* → indoor switch/router 3. *Ground wire* → must be connected to a proper ground rod/building ground. This is the most important part. No ground = no protection 4. Mount it as close to the building entry point as possible 3. *1Gbps only* 4. *Recommended for*: Fi AP Outdoor, G3/G4 Bullet cameras, airMAX radios

Nuna lamba