Mega-Ex Soldering Coil

+1

Abubuwan Tallata Kaya

Nau'i

Sabo Fil

Yanayi

Other

Kaya

Adireshin dakin ajiya

Jiha Lagos • Mushin

141, Agege Motor Rd., Idi-Oro Mushin, Lagos,

Open

• Lit, Asa, 09:00-18:00

60/40 is a general purpose soft solder used in applications involving soldering of copper and copper alloys and/or ferrous base alloys. This alloy should not be used in soldering of potable water systems due to its high lead content. A lead free alloy should be used instead. For water potable systems LM recommends Silver/Copper/Tin system such as Silvabrite 100, or Tin/Silver systems such as Silvabrite and/or Silvabrite. The properties of a soldered joint are dependent upon numerous factors including base metal properties, joint design, metallurgical interaction between the base metal and the filler metal. Joint clearances of 0.003 - 0.005 in. per side are optimum for achieving highest joint strength. Joints with increased clearances can still produce adequate joint strengths depending on final operating conditions.

Nuna lamba