Being a single firing pin flash the YN-560 III is compatible with most cameras having a standard hotshoe when mounted directly on the camera .
Off camera, and using the YN-560 III’s built in radio receiver, compatibility will depend on the transmitter unit used. Most cameras with a standard hotshoe can be used with the YN560-TX and the RF-603 II transmitter units.
Virtually any camera with a sync connection or standard hotshoe could be used if using some other form of radio triggers to fire the flash off camera.
Circuit design – Insulated Gate Bipolar Transistor (IGBT)
Guide No. – 58 (ISO 100, 105mm)
Flash mode – M, Multi
Trigger Mode – On-camera, S1, S2 pre-flash-cancelled, RX 2.4GHz radio receiver
Wireless triggering distance – 100m(2.4G wireless), Optic 20~25m indoor, 10~15m outdoor
Channels – 16
Zoom range – auto24,*********, 80, 105mm
Vertical rotation angle – -7~90 degrees
Horizontal rotation angle – 0~270 degrees
Power supply – 4×AAsize batteries (Alkaline or Ni-MH are usable)
Lighting times – 100~1500 times (AA alkaline cell used)
Recycle time – approx 3s (AA alkaline cell used)
Color temperature – 5600k
Flash time – 1/200s~1/20000s
Flash control – 8 levels of output control1/1********* levels of fine tuning
External interface – hot shoe, PC port port, HV battery port
Additional features – electronic flash head zooming, manual zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection.
Dimensions – 60×73×190mm (Extended state)
Net weight – 350g
Accessories Flash light (1), protecting bag (1), mini stand (1) and manual (1)