Thanking you for your interest in our product
The charger before charging the battery,connect the battery ㈩positive pole with red line clip, connect the battery ㈩negative pole with black line clip .Banned faulty.
Choose batterycharging voltage, when filling one battery ,the charging voltage for 12V, of two batteriescharging series ,the charging voltageshould be 24V. three storage battery charging Voltagergulator choose the series to 36V position, four storage battery charging Voltage regulator choose the series to 48V position.And then the power grid in again AC220V. Open the Current Control switch to charge.
During charging if the battery is low or at night is charged, Chargeregulator switch must be choosing 2\3gear to charge the best. If battery power saturation achieve 50% when can use 567to charge. Depending on the battery power.
The method of confirm the battery is filled or not.
For example:When start charging Chargeregulator pointer when A position is 30 instructions as shown in figure 1).Tocharge battery 4-5 hours after, pointer will return to 5 ~ 10 A position as shown in figure 2).that means: batterypower that has reached 80% saturated volume,1-2 hours to charge batteries, it can be already
Condition: Brand New