Pet Blowing Machine: Product Description:
plastic blow moulding machine Functions and Features:
1) The plastic blow moulding machine suitable for producing PET plastic containers and bottles from 100-2000ml. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle, oil bottle, cosmetics wide-mouth bottle etc.
2) The plastic blow moulding machine adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
3) The air system of plastic blow moulding machine has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow.It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
4) The plastic blow moulding machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
5) The plastic blow moulding machine can be operated in the step-by-step mode and the semi-auto mode.
6) The machine is small with low investment, safety lock system for the blow moulding system, ensure safety operating.
7) Volume exchange will be through the PLC control panel by setting the film sending time and filling time only.
8) One person can operate semi-auto perform loading and product bottle discharging and combining the fully auto blower process for this plastic blow moulding machine.
9) Space saving and low cost for equipment investment.
10) Power supply of plastic blow moulding machine: 3phase, 380/220V, 50/60HZ
Plastic blow moulding machine Specification is as below:
No item plastic blow moulding machine specification
1 air cylinder Airtac brand or Festo brand optional
2 Production capacity 900 to 10000 bottles per hour
3 PLC Omron/ Mitsubishi/ siemens brand
4 electronic component Schneider brand
5 Bottle size 100ml to 2 Litre