1.push the switch to “ON” position.
2.Short touch the “Touch switch” to selection the emergency Light or the night light.
3.Long press the “Touch switch” to adjust the light brightness.
Connect the power supply, if charging indicator turns on, then it’s in charging status. Charging time needs about 13 hours.
With rotary switch, clockwise and anti-clockwise rotation can adjust the lighting.
If it is recharged through sun power, the output working voltage is 5-7V, output working current is 0.6A.
If it is recharged through charger, the output working voltage is 6V, output working current is 0.6A.
When the light becomes weak during using, that means the battery is in lack of power. At this moment, stop using it and recharge it in time so as to protect the battery. Recharge it before the light is completely invisible, otherwise it will case damage to the battery.
Frequent use is required, long-time nonuse is unadvisable. If you don’t use it very often, ple