Yachts Water And Land Terrin 2017

swimming boat with cqu system and floter easy to drive very good gear and engine buy and drive

Length 5.6m width 2.3m height 1m sand pump capacity 83m3/hr suction depth 10m discharge distance 50m

water canu, made in London it can contain about 5 person. very good for swimming exercise, traveling, fishing and swimming competition. it's a military board too with life jacket. you can also attache it a speed boat engine if you like

8/8 inch master dredger for sale. Location topo badagry

TOURING-36 PASSENGER BOAT: It is a brand new passenger boat with the following features, Basic Dimensions ▫ Length : 36’ ▫ Beam : 9’ 10” ▫ Draft : 1’ 7” ▫ Weight : 10900 lbs approx. (4955 kg) ▫ Fuel capacity : 200 US Gal. aluminum fuel tank ▫ Water capacity : 40 US Gal. aluminum water tank ▫ Standard Engines : Yamaha Outboard 2x250 HP ▫ Max speed : 42 knots ▫ Safety regulations : US Coast Guard Standards “MIC-XVA” ▫ Seating capacity : 29 persons (23 in cabin + 6 at bow) Construction ▫ The hull and deck are made out of a single piece GRP mould, built from Combination of chopped strand mat, bi-directional knit fabric and balsa core Hand-laminated under controlled temperatures with Isophthalic polyester resin. ▫ The hull and deck exterior have got mirror glaze gel-coat finish. ▫ The hull is stiffened with GRP moulded frames filled with polyurethane And bonded to hull bottom ▫ On the deck balsa is replaced with plywood to support deck fittings. ▫ All materials used in the construction are approved marine quality. ▫ Basic hull colour : white

Passenger Boat, SEA LOUNGE 40 A floating piece of art, the Sea Lounge 40 is an upscale meeting point for the distinguished few. With a capacity of a mega yacht, it is the boat for a water restaurant, corporate event or private ownership. Specifications Length: 40’ Beam: 12’ 06” Draft: 1’ 10” Fuel capacity: 300 US Gal. aluminum fuel tank Water capacity: 50 US Gal. aluminum water tank Standard Engines: Yamaha Outboard 3x300 HP Max speed: 34 knots Safety regulations: US Coast Guard Standards “MIC-XVA” Seating capacity: 21 persons (including pilot seat) Construction The hull and deck are made out of a single piece GRP mould, built from Combination of chopped strand mat, bi-directional knit fabric and balsa core Hand-laminated under controlled temperatures with Isophthalic polyester resin. The hull and deck exterior have got mirror glaze gel-coat finish The hull is stiffened with GRP moulded frames filled with polyurethane And bonded to hull bottom On the deck balsa is replaced with plywood to support deck fittings All materials used in the construction are approved marine quality Basic hull colour : white Standard Features FRP complete closed cabin with windows and doors Luxury wooden finish lounge with quality teak flooring High quality UV treated leather lounge sofas with designer cushions Rexin ceiling with LED spot lights Courtesy floor lights Marine Generator 11 Kw (Kohler) Marine Air Conditioning System (48.000 BTU) Navigation Package (GPS, radar, VHF, chart plotter, depth sounder) Compass 135 Windscreen Wiper double arm Marine Horn – Twin RC Search Light Anchor 10 Kg With 6m Chain & 50m Rope Fusion Stereo with amplifier and 6 speakers. USB and iPhone docks. 32’’ LCD Screen Build in Refrigerator Build in hot plate Build in Stainless Steel Sink Window blinds Diving Doors on all sides at transom Stainless Steel Windlass Winch With RC Pad Anchor Platform with Bow Roller Bow Sheet in Stainless Steel Bow Roller in Stainless Steel Battery Charger Shore Power Socket Ample luggage compartments under deck Large independent water tight storage compartment at bow. Two removable tables with wooden top and stainless steel poles. Toilet cabinet electric

Loa - 45m hull dimension - 33*9.1*2.75 standard max dredge depth - 18m discharge diameter - 26"/650mm net weight - 300tons max.Slurry capacity500*********m3/hr power@speed - 1641kw@1800rpm alternator - 50kw cutter max speed - 30rpm anchor - 1500kg*2

A brand new scuba diving purpose built boat with 16 tanks compartments and a diving door and ladder. The perfect scuba diving boat for beach resorts and diving centers. Specifications Length: 32’ Beam: 8’ 05” Depth: 1′ 5’’ Weight: 1,900 kg Fuel capacity: 150 US Gal. fuel tank Standard Engines: Yamaha Outboard 2×150 HP Max speed: 32 knots Seating capacity: 10 persons (including pilot) Scuba Tanks capacity: 16 tanks dedicated compartments Construction The hull and deck are made out of a single piece GRP mould, built from combination of chopped strand mat, bi-directional knit fabric and balsa core hand-laminated under controlled temperatures with Isophthalic polyester resin The hull and deck exterior have got mirror glaze gel-coat finish The hull is stiffened with GRP molded frames filled with polyurethane and bonded to hull bottom On the deck balsa is replaced with plywood to support deck fittings All materials used in the construction are approved marine quality Standard hull color : white Scuba diving passenger boat main features Secure tanks compartments x 16 3 search lights for full round boat visibility during night dives Diving door Diving ladder Canopy with aluminum pipes cage Central console with wind screen Driver seat and companion Deck floor compartment x 2 Anchor compartment Stern storage under seat Stainless steel cleats Anchoring and deck lights Twin bilge pump with auto switch Marine compass Battery base & battery switch Bow eye & stern PVC side finder FRP seats upholstered with storage under seats for life jackets Fuel tank GRP with electrical gauge and filter Deck drain Life jackets x 10

brand new yacht From the factory ready. to be ship anywhere in the world call us now for more information

Title: 2017 Built 15.5M Aluminium Passenger Boat Detailed Description: 2017 Built 15.5M Aluminium Passenger Boat/Vessel available for outright purchase FOB, China. Sea Trial yet to be executed. Length Overall: 15.50M Length Moulded: 14.65M Breadth Extreme: 5.24M Breadth Moulded: 4.40M Moulded Depth: 2M Max Draft: 1M MWM Deutsch 2 x 383W Operation Speed: 25 Knots Maximum Speed: 26 Knots Passengers Cap: 20 Pax Crew: 2 Crew Endurance: 10 hours Navigation Area: A1 Sea State: 3 Fuel Capacity: 2,000 Litres Fresh Water: 250 Litres Classification: BV (1 Hull * Mech) Vessel available for Inspection in China, transfer of title will be upon the issuance of a Letter of Credit (LC) from a reputable Bank either in Nigeria or abroad and the LC will be invoked on 3 months upon arrival of Vessel into the shores of Nigeria or Buyer's destination, making any financial commitment to this investment very secured for both Buyer and Seller

yacth for sale, we sell yacht, boats, we have over 50 yacth for sale please contact us for more information on the type of yacht you need and we will deliver thanks, the price for this is 4.5m USD

we sell luxury and super yacht and we also do chatter. sevices and rental call us today for more information on this

Ferry 75 is a sea going ferry with a seating capacity for 100 passengers divided into two separate air conditioned sections. An economy class section with high quality comfortable armchair seats for 88 passengers and a luxury lounge for 12 VIP passengers. The boat comes with a crew cabin with 4 bunk beds. Specifications Length Overall : 22.9 mtrLength Waterline : 20.0 mtrBeam : 6.5 mtrHull Depth : 2.9 mtrDraft : 0.8 mtrDisplacement : 45 tonHull and deck materials : GRPFuel capacity : 2 x 3,000 liter aluminum fuel tankWater capacity : 1 x 500 liter aluminum water tankStandard Engines : Yanmar 2x830 HP inboard dieselDrive : Conventional direct shaftMax speed : 20 knotsPassengers capacity : 100 passengers (88 coach class + 12 VIP class) Construction The hull and deck are made out of a single piece GRP mould, built from combination of chopped strand mat, bi-directional knit fabric and balsa core hand-laminated under controlled temperatures with Isophthalic polyester resin.The hull and deck exterior have got mirror glaze gel-coat finish.The hull is stiffened with GRP molded frames filled with polyurethane and bonded to hull bottomOn the deck balsa is replaced with plywood to support deck fittings.All materials used in the construction are approved marine quality.Standard hull color : white Standard Features Temperature controlled FRP main cabin covered by tempered marine glass with luxury seats for 88 passengers.Separate luggage room at aft for 100 large size bags.One separate VIP luxury lounge cabin with leather rounded sofa seat for 12 persons with LCD screen, kitchen galley with fridge and oven, dedicated toilet cabinet with sink.One crew room on the V-Berth with 4 bunk beds and one toilet with shower.Two toilet cabinets with sink on the back side of the main cabin.Air condition system 70,000 BTU.Marine Generators 2 nos x 25 KW with 1 AC/DC Switchboard panel on the dash board.Electrical Windlass 1,700 watts with Anchor and 100Mtr Galvanized Chain.Liferafts for 100 passengersStandard Navigation Equipment (GPS, Radar and VHF Radio)Non-skid flooringMarine grade hornsNavigation lightsRemote controlled search lightCompassBollards x 8 nosWindscreen wipers x 2 nosBow railing in stainless steel.Shore Power socket Optional Features Flybridge seating with aluminum T-Top canopy.Electric winch.Bow thrusterStern thrusterIce Maker Marine 220V 50/60 HzWater Maker (140 liter/hour)Camera Monitoring SystemThuraya Maritime Satellite Phone / FaxNight Vision Camera FLIR (M-Series M-324XPThe Ferry 75 is a sea going ferry with a seating capacity for 100 passengers divided into two separate air conditioned sections. An economy class section with high quality comfortable armchair seats for 88 passengers and a luxury lounge for 12 VIP passengers. The boat comes with a crew cabin with 4 bunk beds. Specifications Length Overall : 22.9 mtrLength Waterline : 20.0 mtrBeam : 6.5 mtrHull Depth : 2.9 mtrDraft : 0.8 mtrDisplacement : 45 tonHull and deck materials : GRPFuel capacity : 2 x 3,000 liter aluminum fuel tankWater capacity : 1 x 500 liter aluminum water tankStandard Engines : Yanmar 2x830 HP inboard dieselDrive : Conventional direct shaftMax speed : 20 knotsPassengers capacity : 100 passengers (88 coach class + 12 VIP class) Construction The hull and deck are made out of a single piece GRP mould, built from combination of chopped strand mat, bi-directional knit fabric and balsa core hand-laminated under controlled temperatures with Isophthalic polyester resin.The hull and deck exterior have got mirror glaze gel-coat finish.The hull is stiffened with GRP molded frames filled with polyurethane and bonded to hull bottomOn the deck balsa is replaced with plywood to support deck fittings.All materials used in the construction are approved marine quality.Standard hull color : white Standard Features Temperature controlled FRP main cabin covered by tempered marine glass with luxury seats for 88 passengers.Separate luggage room at aft for 100 large size bags.One separate VIP luxury lounge cabin with leather rounded sofa seat for 12 persons with LCD screen, kitchen galley with fridge and oven, dedicated toilet cabinet with sink.One crew room on the V-Berth with 4 bunk beds and one toilet with shower.Two toilet cabinets with sink on the back side of the main cabin.Air condition system 70,000 BTU.Marine Generators 2 nos x 25 KW with 1 AC/DC Switchboard panel on the dash board.Electrical Windlass 1,700 watts with Anchor and 100Mtr Galvanized Chain.Liferafts for 100 passengersStandard Navigation Equipment (GPS, Radar and VHF Radio)Non-skid flooringMarine grade hornsNavigation lightsRemote controlled search lightCompassBollards x 8 nosWindscreen wipers x 2 nosBow railing in stainless steel.Shore Power socket Optional Features Flybridge seating with aluminum T-Top canopy.Electric winch.Bow thrusterStern thrusterIce Maker Marine 220V 50/60 HzWater Maker (140 liter/hour)Camera Monitoring SystemThuraya Maritime Satellite Phone / FaxNight Vision Camera FLIR (M-Series M-324XP

Loa - 28m hull dimension - 19*5.2*1.6m discharge diameter - 14"/350mm net weight - 70tons max slurry capacity - 1500m3/hr power @speed - 559kw@1800rpm alternator engine - 30kw cutter max speed - 35rpm ladder/swing winches - 40kn/40kn

Boat for rent 25 passenger boat with good comfort to the passenger which is taking the boat.... interesting person should call or Whatsapp for inspection thanks

Brand new Yamaha board Engines for different types of Boats. Yamaha F250DETX (4 stroke) (25 inch) (digital controls and rigging) (standard rotation) Yamaha FL250DETX (4 stroke) (25 inch) (digital controls and rigging) (counter rotation)

TRANSPORTER 32 PASSENGER BOAT: It is brand new passenger boat with the following features; Basic Dimensions ▫ Length : 32’ ▫ Beam : 8’ 05” ▫ Draft : 1’ 9’’ ▫ Weight : 1,900 kg ▫ Fuel capacity : 150 US Gal. fuel tank ▫ Standard Engines : Yamaha Outboard 2x150 HP ▫ Max speed : 34 knots ▫ Seating capacity : 25 persons (including pilot and assistant) Construction ▫ The hull and deck are made out of a single piece GRP mould, built from combination of chopped strand mat, bi-directional knit fabric and balsa core hand-laminated under controlled temperatures with Isophthalic polyester resin. ▫ The hull and deck exterior have got mirror glaze gel-coat finish. ▫ The hull is stiffened with GRP molded frames filled with polyurethane and bonded to hull bottom ▫ On the deck balsa is replaced with plywood to support deck fittings. ▫ All materials used in the construction are approved marine quality. ▫ Standard hull color : white

boat with all facilities inside it has a toilet 2 cabin,3 bedroom,two toilet,uper deck and lots more we sell brand new. and used yacth contact us now for more information on this

imported with engine , However engine of the bike needs coupled together for it to function , its open to Negotiation

Loa - 40m hull dimension - 30*7.8*2m standard max dredge depth - 15m discharge diameter - 20"/500mm net weight - 180tons max slurry capacity350*********m3/hr power@speed - 895kw@1800rpm alternator - 30kw cutter max speed - 30rpm anchor - 1000kg*2

Loa - 26m hull dimension - 18*5.2*1.6m standard max dredge depth - 10m net weight - 65tons max slurry capacity - 1200m3/hr main engine - cummins kta19 power @ speed - 559kw@1800rpm alternator - 30kw cutter max. Speed - 35rpm

Loa- 23.0m hull dimension-- 16*5.2*1.6m discharge diameter - 10"/250mm net weight - 40tons max.Slurry capacity - 1000m3/hr power @speed - 336kw@1800rpm altanator - 30kw voltage - 24dc & 220/380ac standby diesel generator - 30kw

Brand new brand new Pioneer predator dredger 18 x 18, 4sale

Rent for dredgers, excavators, swamp Buggy,grader, payloader,hiab crane, Cherry picker and roller,manlift, cranes, concrete mixer, and more call for serious info