Four in one electronic digital speed measuring device of soil analyzer is a new soil test, soil pH, moisture and humidity, temperature and light intensity of plant, the use of a 9V carbon battery, simple probe length 200 mm. The instrument measures the parameters through liquid crystal display. This instrument also has the function of low power indication and automatic disconnection of power supply. It saves time and effort and efficiency. The utility model is suitable for planting flowers and grasses and landscaping.
Four in one gardening detector
One Measure the light intensity of the current environment
LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+
Two Measure the moisture content of soil
DRY+, DRY, NOR, WET, WET+
3, the measurement of soil temperature, the temperature measurement range: -9~+50 degrees (16~122 degrees Fahrenheit), (accuracy: /1 1 degrees Fahrenheit)
4, measuring soil pH, PH measuring range: Three5-9.0
Operating temperature: +5 DEG C, ~+40 DEG C
Probe length: 200mm
Large screen LCD user interface
LED backlit auxiliary lighting for easy reading
The temperature of Public English? Spectrum also 8?
Insufficient battery prompt function
Power saving automatic shutdown function, 5 minutes without any operation, automatic shutdown
Easy to operate and easy to carry
Power source: 9V battery
Please install the battery before use, remove the probe protection cover
PressONButton opens the instrument
Align the light sensor window with the highest point light source.
The intensity of the current light will be shown on the lcd.
Tip: do not block the light or create shadows for the light sensor
Press [PH/TEMPThe button is on the backPHValue position
The probe is vertically inserted into the soil and needs to be tested as soon as possible. Don't plug the probe too deep, damaging the roots of the plant.
Press [ON] the button begins to measure.
TestPHThe value will be displayed on the LCD screen
Measure several times to get the exact value you need.
Tips;1.Vertical insertion of probes at the edge of the middle of the plant stem.
2.Please gently push the soil into the investigation to avoid damaging the probe.
3.If the measured soil is too dry or fertile, it cannot be measured accuratelyPHValue, users can sprinkle some water, and then measure it in half an hour
A Press [PH/TEMPThe button is on the backTEMP
B Insert into the soil as vertically as possible. Don't plug the probe too deep, damaging the roots of the plant.
C PressNOKey start measurement
D Test soil moisture values will be displayed on the LCD screen.
E Measure several times to get the exact value you need.
AWhen measuring humidity, soil moisture values will also be displayed on the LCD panel.
BPress [DEG]/FahrenheitOFF] button to set the humidity is Fahrenheit or centigrade