This 450LM Solar Power Motion Sensor Outdoor Light with 48LEDs and 3Modes can illuminate your home, driveway and dark corners of your surroundings.
It harnesses the energy from sunlight to charge the inbuilt battery during the day and automatically switches on in the night to light up your surroundings.
The inbuilt sensor is triggered when someone or an object come close installed area between 5-6 meters within an angle of 120 degrees.
Eco-friendly ABS and PC with good heat dispersion, odour-free and corrosion resistant..
In dark environment, it automatically on when people comes near at night and off when people leave..
Solar-powered with polysilicon solar panels, high photoelectric conversion efficiency, energy saving..
High quality LED beads, super bright, no dazzling and strobing, offering a perfect illumination environment. .
It can conveniently be used to detect intruders and also light up you environment.
Application: This can be installed in residential buildings, Business offices, gate entrance, dark areas of your surroundings. Etc.
Solar Panel: 6v 2.5W
Energy-efficient Conversion rate: 18%
Battery: Li-ion battery 3.7V 2000mAh x 1pcs
Working Voltage: 3.2V Working Current: 1200MA
LED: 60mA / 28Lm / SMD2835 * 48pcs 24pcs White light+24pcs Warm white
LED lumens: 450Lumens
Working temperature: -20℃~+60℃
Sensing Distance : 5-10M with Sensing Angle
Charge time: 4-6hours
1) Press the switch 3 to 5 second, open the light lamp and will flash twice, come to the “Body induction + Dim bright” mode, The brightness is strong when people go through the sensory area, last 10 seconds, or become Dim light when people leave.
2) Press the switch again, LED lamp will flash twice, open the “Body induction + turn off” mode. The brightness is strong when people go through the sensory area, last 10 seconds, or turn off automatically when people leave.
3) Press the switch third time, LED lamp will flash twice, open the “constant light” pattern, the brightness will be only half of “Body induction” mode, it will be lighting-off automatically after power off.
4) Press the switch fourth time, turn off the light lamp.
Lighting time under induction: Extension for 10 seconds after inducted, time will be re-clocked if the extension time is not finished but re-induction.
Light control function: The circuit will stop work and the switch is unavailable when the solar panel met with light; it will start up automatically when the solar panel not met with light.
Work current under Body induction: 3.8V1400mA
Work current under Dim light pattern: 3.8V30mA
Work current under Constant light pattern: 3.8V400mA
Waterproof level -IP65
Charging time >6 hours under 1000W/㎡ standard
Lighting time>6-10 hours
1. For the first time using, please put the product under the sunlight to charge for several hours before using.
2. When the product isn’t in use for long time, please take out the battery and store it in a dry or cool place to avoid the leakage. Recharge the battery by every three months at a time, to ensure it is not damaged and leakage.
3. If the battery is exhausted, the light lamp will flash. Please recharge it before normal using.
4. In fact, duration of light depends on exposure level of sunlight, geographical location, weather condition and the time of daylight. The stronger of sunlight, the faster of charging; the longer time of sunlight, the more of power in charging. The effect will be weakened in the raining days.
48 leds - N12500
36 leds - N10000