ALL OF THESE MEDIUM DUTY COMMERCIAL REVERSE OSMOSIS SYSTEM HAVE THE FOLLOWING COMPONENTS:
City Water - US Water Backwashing Catalytic Carbon Pre-Filter - Automatic backwashing system removes chlorine, chloramines, and organics, along with chemicals and pesticides (10-Year Tank Warranty/5-Years on Valve & Electronics)
Well Water - US Water Oxi-Gen System - Removes iron, sulfur, and mangangese along with chemicals and pesticides (10-Year Tank Warranty/5-Years on Valve & Electronics)
Anti-Scalant Injection System - Eliminates Scaling of the Membrane(s), Replaces a water softener, FDA Approved. The anti-scalant while NSF Certified is rejected by membranes, so it is not in the water stream (10-Year Tank Warranty/3-Year Pump Warranty)
US Water Reverse Osmosis Module - Utilizes the US Water Premium-Grade Reverse Osmosis System with Extra-Low Energy Membranes, High Quality Components and Backed By the Longest Warranty in the Industry (3-Year Warranty on Everything but Consumables)
NSF Atmospheric Storage Tank - A Reverse Osmosis System Works Best with NO Back-Pressure - This NSF Certified Tank is Perfect for High Purity Water (10-Year Warranty)
Grundfos Variable Speed Re-Pressurization Pump - Delivers From 1 GPM up to 15 GPM (3-Year Warranty)
US Water Pulsar Disrupter Disinfection System - Assures That NO Airborne or Other Bacteria Enters the System - This is the Final Step that Delivers Absolute Purity (Lifetime Warranty on Housing – Uses no Electricity)
US Water Pulsar Ultraviolet Disinfection System - Assures That NO Airborne or Other Bacteria Enters the System - This is the Final Step that Delivers Absolute Purity (10-Year Warranty on Chamber/3-Years on Electronics)
Our systems will produce more than they are rated, but for longevity, sustainability and economy, you should size the system to what you actually need each day, not what the system will deliver at maximum capacity. When sizing a high-purity commercial reverse osmosis system, you should size the system so that it only has to run 8 to 12 hours a day. That means that if you need 500 to 750 gallons per day (GPD), you need to have a system that is rated at 1,500 GPD. Proper sizing assures system longevity and economy.
SYSTEM DESIGN & CONFIGURATIONprelude-backgroundimage.png
Stage 1 - US Water Backwashing Catalytic Carbon Pre-Filter or OXI-Gen System utilizes Catalytic Carbon to remove chlorine, chloramines, chemicals and pesticides before the water gets to the reverse osmosis membrane(s). Chlorine is especially damaging to a reverse osmosis membrane and degrades it very quickly. The filter is fully automatic, has one internal moving part and operates on 24 Volts. It uses about $3.00 of electricity a year and has a super capacitor backup that keeps the memory even during power outages. It has a built-in bypass so that the tank can be easily taken off-stream to replace the carbon (typically every 4-5 years).
Stage 2 - Anti-Scalant System injects a small amount of anti-scalant into the reverse osmosis system ahead of the membranes. The anti-scalant coats 30g-white1.jpgthe membranes so that calcium, magnesium and silica scaling are eliminated, dramatically increasing membrane life and water quality. A water softener does nothing for silica and while it is good at eliminating calcium and magnesium hardness, it requires salt and wastes thousands of gallons of water each year. The anti-scalant system is much more "green" than any water softener because it doesn't use salt or waste water. Anti-scalant needs to be added once or twice a year, so little maintenance is required - you simple mix a bottle of concentrated anti-scalant with the high purity reverse osmosis water produced by the system and add it to the solution tank. A typical system might use $200 to $300 a year in anti-scalant (depends upon actual usage).
Stage 3 - US Water Premium Commercial Reverse Osmosis System is simply the Best-of-the Best when it comes to Commercial Reverse Osmosis. The system features a new, innovative and expandable design. These systems feature only the highest quality components, including a programmable computer controller with many built-in standard features, stainless steel booster pump for high performance and corrosion resistance, extra low energy membranes and fiberglass pressure vessels for enhanced performance and durability. This system can recover up to 75% of the water. That simply means that operating costs for water are much lower as many reverse osmosis systems recover only 15 to 35% of the water they use. It has an aluminum frame which will not corrode, and rust like most other commercial reverse osmosis systems and features the following deluxe features as standard:
S150 Computer Controller with Feed Flushaxeon-r1seriesro.png
Chemical Pump Outlet
Tank Level Input
Low Pressure Monitoring and Alarm
Permeate Flow Meter
Concentrate Flow Meter with Integrated Stainless Steel Valve
Concentrate Recycle Flow Meter with Integrated Stainless Steel Valve
Pre-filter 0-100 psi Panel Mounted Glycerin Filled Gauges
Pump Discharge and Concentrate 0-300 psi Panel Mounted
Glycerin Filled Gauges
Pulsar Interceptor Pre-filter - removes bacteria and reduces silica
Single O-Ring Heavy-Duty Filter Housing
HF5 Extra Low Energy Membrane Elements
Fiberglass Pressure Vessels- 300 psi
Goulds® Multi-Stage Stainless Steel Booster Pumpatmospherictank.png
Feed Solenoid Valve with Manual Bypass
Feed Low Pressure Switch
John Guest® Push/Pull Fittings with Locking Safety Clips
White Powder Coated Aluminum Frame
Stage 4 - NSF Certified Atmospheric Tank with Bulkhead Fittings and Liquid-Level Controls.
100% seamless polypropylene composite construction
Produced using NSF and/or FDA listed materials
Meets stringent US requirements for water components
Environmentally safe, 100% lead-free
Will not introduce chemicals or elements into water
Includes Pre-Installed Float Switch with Junction Box to Connect to Reverse Osmosis System
grundfos.jpgStage 5 - Grundfos MQ3-45 Pressure Booster Pump is compact and extremely easy to install. The pressure switch and tank are already built into the MQ. Furthermore, it is self priming and water-cooled with a very low noise level. The outlet pipe connection can be angled up to 5° to fit your existing pipe-work. The Grundfos MQ pump is simple and easy to operate. The settings are clearly indicated on the user-friendly control panel with indicator lights for Pump on/off, auto reset, and an alarm indicating dry running or overheating. Grundfos MQ is built for trouble-free operation. It's construction from corrosion-resistant materials means it can be used for ultrapure water. The anti-cycling feature prevents the pump from repeatedly starting and stopping in the event of a dripping tap or a minor leak. If there is no water available, the pump will stop to protect itself and restart automatically when water is available again. There is no need to worry about a separate pressure tank, pressure switch, electrical connections, fittings or any other separate items. With MQ, it is literally a matter of connecting the power and turning on the jet pump. Installation of an MQ pump is simple and can be done in a matter of minutes.
The MQ pump has built-in dry-run protection. If the pump runs dry, the pump automatically stops.
It will then attempt to restart every half hour for a maximum of 24 hours until water is available from the source.
If more than 24 hours pass without water, the pump must be restarted manually.
The auto reset function can also be disabled.
The Grundfos MQ pump also has built-in thermal protection.
If the pump overheats it immediately stops.
After a 30-minute cooling-down period, the pump will automatically restart.pulsar uv
Stage 6 - US Water Ultraviolet Disinfection System utilize a natural quartz sleeve to protect the lamp and allow the maximum amount of UV rays to penetrate and disinfect the water. With extremely durable construction, high quality quartz sleeves high-performance lamps, you can’t go wrong. Micro-organisms are inactivated within seconds, with no harmful chemicals or by-products. These compact units require minimum space, simple installation and maintenance. Produces little change in water temperature even after prolonged periods of no water flow, making this ideal for many applications. It can also be disinfected with the Pulsar Disrupter which uses no electricity.
Audible ballast with LED "lamp-out" indicator
High output low pressure mercury vapor lamps with high isolation pin design
Compact design (just 3.5" x 23.5")
Manufactured with 304 Stainless Steel
The disinfection chamber is polished for medical or laboratory use
Easy servicing - no need to turn off the water flow to chamber to change the UV lamp
Open-end quartz sleeve and stainless steel gland nuts
Low operating temperature
Excellent sealing efficiency
Validated UV Lamps are rated at 9,000 hours life (1-year)