Canon Refill Ink Set Withe Refill Ink Cartridge For Pixma 7240

Posted yesterday, 10:27      Ikeja, Lagos State, Nigeria
72 views
Post Ad like this for FREE

Performance and specifications

Condition
New
Type
Cartridges

Ad details

Description
Canon Pixma 7240 printers use individual ink cartridges for each of five colors. Cartridges have a small microchip that will need to be reset when you refill them, so you'll need a chip reset device, which you can purchase online. Refilling ink cartridges can be messy, so put newspapers or rags down before you begin to avoid getting ink all over your work surface.
1. Remove the label from the top of the empty cartridge. You want to expose the round plastic stopper. This is where the ink is injected.
2. Place the orange plastic cartridge cap on the bottom of the cartridge and secure it with rubber bands. The plastic cap came with the cartridge when you bought it. If you've lost it or thrown it away, use a piece of cardboard. This keeps ink from leaking out of the bottom while you're refilling.
3. Enlarge the small hole in the plastic stopper at the top of the cartridge using the enlarging tool that came with your kit. If there's no awl or enlarging tool, heat a small screw with a lighter and screw it into the stopper. Use pliers to pull the screw out and the stopper will come out with it.
4. Fill the provided syringe with ink following the kit manufacturer's instructions. Some kits include a pre-filled syringe for you.
5. Insert ink into the cartridge using the refill syringe and the hole you just enlarged or created.
6. Remove the plastic cover from the bottom of the cartridge and let the excess ink drip off.
7. Replace the plastic stopper with the plastic end of a syringe plunger if you removed it earlier. Remove the plunger from the syringe and place the small plastic end into the hole at the top of the cartridge. Pull the plunger out of the small plastic end, making sure the plastic stays in the cartridge hole.
8. Place the cartridge into the chip reset device and wait for it to flash or beep, depending on
Key features
Remove the label from the top of the empty cartridge. You want to expose the round plastic stopper. This is where the ink is injected.
Place the orange plastic cartridge cap on the bottom of the cartridge and secure it with rubber bands. The plastic cap came with the cartridge when you bought it. If you've lost it or thrown it away, use a piece of cardboard. This keeps ink from leaking out of the bottom while you're refilling.
Enlarge the small hole in the plastic stopper at the top of the cartridge using the enlarging tool that came with your kit. If there's no awl or enlarging tool, heat a small screw with a lighter and screw it into the stopper. Use pliers to pull the screw out and the stopper will come out with it.
Fill the provided syringe with ink following the kit manufacturer's instructions. Some kits include a pre-filled syringe for you.
Insert ink into the cartridge using the refill syringe and the hole you just enlarged or created.
Remove the plastic cover from the bottom of the cartridge and let the excess ink drip off.
Replace the plastic stopper with the plastic end of a syringe plunger if you removed it earlier. Remove the plunger from the syringe and place the small plastic end into the hole at the top of the cartridge. Pull the plunger out of the small plastic end, making sure the plastic stays in the cartridge hole.
Place the cartridge into the chip reset device and wait for it to flash or beep
090 xxx

Similar adverts

Show more ads >>>
₦10,500
Last seen 23 hrs ago
090 xxx
09024227774
Tell seller that you found ad on Jiji.ng
Please read safety tips
  • Do not pay in advance even for the delivery
  • Try to meet at a safe, public location
  • Check the item BEFORE you buy it
  • Pay only after collecting the item